the ideal: McCall 6273, originally spotted on glass of fashion
ORIGINAL Pattern Description:
(from glass of fashion's etsy site)
Cute pattern by McCalls for a button through dress with gathered detailing on the bodice. Choose a high keyhole neck with bow detail or cut-out neck. Three sleeve variations: short gathered, three quarter gathered, or long and straight.
Actual Patterns Used:
Simplicity 3262 purchased from savagespider | McCall 6314 purchased from VintageJubilee |
Did it look like the photo/drawing on the pattern envelope once you were done sewing with it?
yes! in fact, i liked it even better once i decided to make the skirt have some extra fullness in the back, as suggested by McCall 6314.
What did you particularly like or dislike about the pattern?
i decided that the gathers on the bust darts were too nice a design feature to ignore. of course, the instant i decided this, someone snapped up the pattern on etsy. six months later i finally had enough understanding of the pattern pieces, and additional patterns for inspiration and guidance, to attempt it on my own.
Fabric Used:
liberty of london tana lawn "hanako" from B&J in New York City
Pattern alterations or any design changes you made:
simplicity 3262 had both the bust gathers i admired as well as a kimono sleeve, instead of the set-in sleeve on McCall 6314. gathering up the sleeve and tying it off was simple and easy and best of all, built into the sleeve on S3262. M6314 inspired a continuous gather going from the bust apex down to about the hip, which i found both flattering and aesthetically pleasing. also, i really enjoyed the skirt design on M6314, which gives one some extra fullness in the back.
obviously, looking at the pattern pieces, there is very little complicated drafting going on here, and given enough time i could have done it myself--maybe. (drafting is a bit out of my wheelhouse, but necessity may have surprised me...) still, i had these patterns in the stash, and why re-invent the wheel? the major "drafting" i did was to turn the v-neck into a sweetheart neckline (thank you, french curve) and to draft an extension beyond the CF point on the bodice and skirt pieces to accommodate a button front.
i shortened the skirt to go 22" down from my natural waistline instead of the period-appropriate below-knee length. but i'm beginning to wonder, given the prevalence of longer hems this season, if i may need to stop shortening my vintage skirt patterns!
Construction:
as has become my standard practice on these gorgeous 40s dresses, i didn't line or face anything but finished all seams (including neckline and armscye) with a bias binding. in this instance, i used a matching bias binding on all seams and finished the waistline seam with a bit of contrast grosgrain ribbon from Pacific Trimmings. the hem was turned up and finished with some basic wright's hem lace in the same color as the ribbon.
buttonholes thanks to jonathan embroidery. to make the front extensions work as a sort of makeshift placket, i took a strip of fusible interfacing tape, sewed it to the RS raw edge of the extension, flipped it over to encase the edge, and turned the entire bit over once more for a clean and "faced" finish. really, an adaption of the excellent facing techniques recently described on both the off-the-cuff blog as well as the male pattern boldness shirt sew-a-long.